renghe@hm-adhesive.com   
 Tracy +86 18968061138

glue for iron cans

PRODUCTS > iron cans > glue for iron cans

glue for iron cans

 Product Dispaly




 Product Description

This series RH products are applicable for labeling on iron cans. They have good bonding strength and low temperature resistance, and have good bonding performance for most packaging materials.  They are convenient to use.

It has the advantages of environmental protection, good adhesion, fast curing, smooth operation, smokeless and odourless, no wire drawing, not easy to carbonize, etc.


  Product Parameters


Soften Point(℃)

Viscosity@180℃(mPa.s)

70-130

200-80000


 Application



 Operating Equipment



 Package


25kg/ctn.


  Matters Need Attention


1. Before using mass products,please make a trial small amount in advance.


2. The working temperature should not exceed 200℃,in order to avoid carbonization and decomposition. If the working temperature is lower than recommend temperature,the bonding strength is affect as well.


3. The tank lid should be well-covered to avoid the dirt falling.  

Hot melt adhesive should as per the principle of "first in,fist out" and "no need melting more if not necessary"  to ensure the best bonding performance and glue's shelf life.


4. Hot melt adhesive bonding performance also affect by different seasons,we advise customer not stock too much or consult our engineer and sales before purchase the order quantity.


5. This product should be stored at ventilation, far away from heat source, no direct sunlight, clean and dry warehouse.Products shelf life  is 12months in generally.It needs to be tested again after the storage period is exceeded.


6.Due to the influence of raw material color,each batch of products may have some color difference,but it does not affect its bonding performance.