renghe@hm-adhesive.com   
 Tracy +86 18968061138

ceilling assmbly glue

PRODUCTS > Hot melt adhesive for automobile > ceilling assmbly glue

ceilling assmbly glue

 Product Display






 Product Description


This series RH products are applicable for ceilling assmbly of automobile  interior decoration

It has the advantages of environmental protection, good adhesion, fast curing, smooth operation, smokeless and odourless, no wire drawing, not easy to carbonize, etc.

 Product Parameters

test item

ceiling assmbly or
head light assbly

ceiling assmbly

wire binding

carpet assmbly in car trunk

color

yellowish block

white sticks

black block

   yellowish block

soft point,℃

145±5

145±5

110±5

110±5

Viscosity@180℃,mPa.s

8000~30000

8000~25000

3000~20000

2000~10000

open time, s

10~15

5~8

------

15~20

recommend temperature

165℃~210℃

80W~120W

150℃~180℃

155℃~190℃

recommed equipment

hot melt glue tank
to spray coating

hot melt glue gun

hot melt glue tank
to knife coating

lamination or spray coating



 Application



 Operating Equipment



 Package


25kg/ctn.



 Matters Need Attention


1. Before using mass products,please make a trial small amount in advance.


2. The working temperature should not exceed 200℃,in order to avoid carbonization and decomposition. If the working temperature is lower than recommend temperature,the bonding strength is affect as well.


3. The tank lid should be well-covered to avoid the dirt falling.  

Hot melt adhesive should as per the principle of "first in,fist out" and "no need melting more if not necessary"  to ensure the best bonding performance and glue's shelf life.


4. Hot melt adhesive bonding performance also affect by different seasons,we advise customer not stock too much or consult our engineer and sales before purchase the order quantity.


5. This product should be stored at ventilation, far away from heat source, no direct sunlight, clean and dry warehouse.Products shelf life  is 12months in generally.It needs to be tested again after the storage period is exceeded.


6.Due to the influence of raw material color,each batch of products may have some color difference,but it does not affect its bonding performance.



Previous: seat assmbly glue
Next: felt glue